Strata CIX 200, Programming Manual

Page: 424 / 508

Operation
Traffic Measurement
10-20
Strata CIX Programming Vol.1 12/09
DID Intercept
17 Select DID ILG-Intercept
DID Intercept Call Type
Select which Incoming DID Line Group should have traffic
measurement enbaled/disabled for intercepted calls. Intercept occurs
on DID calls when a received DID number does not match any DID
number programmed in the database, or a destination assignment
match was not found because a destination was not programmed in
the database or the destination was not operating properly.
Select No DID to measure DID calls that come to the system that are
not assigned as a DID number in the CIX database. Select Not
Determined to measure DID calls that come to the system that are not
assigned to a destination in the CIX database, or the destination is not
operating properly.
18 Measure DTMF Receivers Measure DTMF Receiver traffic
Possible values: Enable or Disable
19 Measure Conf. Circuits Measure Conference Circuit Receiver traffic
Possible values: Enable or Disable
20 Station Hunt Group No. Enter the Station Hunt Group number that should be included in Traffic
Measurement reports.
Possible values: Enable or Disable
F
IELD
D
ESCRIPTION