Strata CIX 200, Programming Manual

Page: 375 / 508

Services
LCR/DR Screening
Strata CIX Programming Vol.1 12/09
9-25
Ser
v
ices
531 DR Screening Table for OLG
Prerequisite Program: None
Assigns DR Screening Table for an Outgoing Line Group (OLG). Up to four codes may be assigned per
line group. Used for outgoing calls other than LCR.
F
IELD
D
ESCRIPTION
00 Outgoing Line Group Enter the OLG Number.
Possible values:1~6 CTX28, 1~32 CIX40, 1~32 CTX/CIX/100, 1~50
CIX200, 1~50 CTX/CIX 670 BCTU only or BBCU only,
1~128 CTX/CIX670 BCTU + BEXU or BBCU + BECU,
1~50 CIX1200 HCTU only, 1~128 CIX1200 HCTU +
HEXAU, 1~220 CIX1200 HCTU + HEXBU
(default = 0)
01 Behind Centrex
Access Code
Enter the access code expected by an attached Centrex, PBX or Tie line.
Possible values:Up to 8 ASCII characters (default = no value)
02 Add or Delete Code Add or Delete the code entered above. Leaving the field empty removes an
existing code. Activation requires entries in OLG Group number and 01
Behind Centrex Access Code above.
Possible values:Add or Delete (default)
03 DR Action for
Centrex
Apply DR to the dialed digits.
Possible values:
•
Bypass (default) – does not apply DR.
•
Skip and Apply– applies DR to the dialed digits excluding the number of
digits specified in Skip Length.
04 Skip Length Enter the number of leading digits to be ignored by DR.
Possible values:0~8 (default = 0)
05 Pause Length Enter the length of the pause to be inserted between dialing digits.
Possible values:0~10 (default = 0)