Strata CIX 200, Programming Manual

Page: 374 / 508

Services
LCR/DR Screening
9-24
Strata CIX Programming Vol.1 12/09
LCR/DR Screening
Program Number(s): 530 and 531
These programs enable and set up screening for DR and LCR.
1. Select LCR/DR > LCR/Holiday Time.
2. Enter Program 530 and 531 data or click one of the following buttons:
- List – view a summary list of programmed Screened Dial Strings or Behind Centrex Access Codes.
-
Copy – Enter a Screened Dial String or Behind Centrex Access Code in the field with the
corresponding name. Click Copy to make a new assignment.
- Get Default - sets all data to factory defaults.
3. Click Submit .
530 DR LCR Screening Table Assignment
Prerequisite Program: None
This command screens dialed digits for access codes such as Carrier Identification Codes or Behind
Centrex/PBX access codes. Used only in LCR calls.
F
IELD
D
ESCRIPTION
00 Screening Dial String Enter the string of external digits to be screened.
Possible values:Up to 7 ASCII characters (default = no value)
01 Add String to Table Add the screening dial string to the DR LCR screening table.
Possible values:Add or Delete (default)
02 Destination Restriction
Action
Select DR Action.
Possible values:Bypass (default) or Skip and Apply
•
Bypass – Do not apply DR.
• Skip and Apply – Apply DR to the dialed digits excluding the
number of digits specified in skip length.
03 Least Cost Routing
Action
Select LCR Action.
Possible values:
• Apply – (default) Apply LCR to all of the external dialed digits.
•
Skip and Apply – Apply LCR to the dialed digits excluding the
number of digits specified in skip length.
04 Digit Modification Action Select Digit Modification application.
Possible values:
•
Apply – (default) Apply digit modification from the first digit.
• Retain – Retain the skipped digits and apply digit modification
starting from the next digit specified by skip length.
•
Discard – Discard the skipped digits and apply digit modification
starting from the next digit specified by skip length.
05 Skip Length Specify the number of digits at the beginning of the dial string to be
ignored before DR, Digit Modification, or LCR is applied.
Possible values:0~5, 0 = delete (default = 0)