Strata CIX 200, Programming Manual

Page: 378 / 508

Services
Account Codes
9-28
Strata CIX Programming Vol.1 12/09
Account Codes
Program Number(s): 570, 506 and 571
Assign Account Code data to Strata CIX.
Account Codes can be verified or unverified. Verified Account Codes simultaneously function as
Authorization Codes. This is achieved by restricting a telephone’s calling privileges so that it cannot
complete a call without entering a code. The Strata CIX compares that code to entries in the table created
below and raises the telephone’s restrictions to permit the call. If the dialed code cannot be found in the
table, the call will be rejected. The requirement to enter an account code is established in the telephone’s
Class of Service.
Unverified account codes do not affect restriction levels and simply report the account code dialed in the
SMDR record for further processing by call accounting equipment.
All account codes in a CIX (verified or not) must have the same number of digits (Registered Digit Length,
parameter 02, in Program 570 below).
The system can be programmed to verify only a portion of an account code (Verified Program Length,
parameter 01, in Program 570 below). For example, a company may choose to identify its customers with
four digit numbers but have an overall account code length of eight digits. Registered Digit Length would
be eight and Verified Program Length would be four. Upon entry of the first four verifiable digits and then
four random digits to fill out the required length, the call would be processed.
1. Complete the data sheet.
2. Select > LCR/DR > Account Codes.
3. Enter Program 570 data.
4. Enter Program 506 data. Click List to view a summary list of programmed Account Codes.
5. Enter Program 571 data.
6. Get Default - sets all data to factory defaults.
7. Click Submit .