RKC INSTRUMENT Z-TIO-G, Instruction Manual

Page: 201 / 246

9. COMMUNICATION DATA DESCRIPTION
IMS01T28-E4
9-93
Continued from the previous page.
Example 1: Switching the memory areas of all channels of two Z-TIO modules
Base interacting module: CH1 of modules address 0
Module to be linked:
CH2 of module address 0
CH1 and CH2 of module address 1
Z-TIO 1 (module address: 0)
Memory area transfer
Address of interacting modules Setting not necessary
Channel selection of interacting modules Setting not necessary
CH1
Selection switch of interacting modules 0
Specify 0 (No interaction)
Memory area transfer
Address of interacting modules  1 or 0
Specify the home module
Channel selection of interacting modules 1
Specify CH1
CH2
Selection switch of interacting modules 1
Specify 1 (Interact with other channels) in the memory area number
Z-TIO 2 (module address: 1)
Memory area transfer
Address of interacting modules 0
Specify module address 0
Channel selection of interacting modules 1
Specify CH1 of module address 0
CH1
Selection switch of interacting modules 1
Specify 1 (Interact with other channels) in the memory area number
Memory area transfer
Address of interacting modules 0
Specify module address 0
Channel selection of interacting modules 1
Specify CH1 of module address 0
CH2
Selection switch of interacting modules 1
Specify 1 (Interact with other channels) in the memory area number
*
In the above example, when the memory area number (RKC communication identifier: ZA, Modbus address: 006EH) of CH1 of
module address 0 is changed, the memory area numbers of linked channels all change at the same time.
Interacting
*
Example 2: Switching the memory areas of all channels of two Z-TIO modules using one Z-DIO
module
Base interacting module: Z-DIO module (module address 16)
Module to be linked:
CH1 and CH2 of module address 0
CH1 and CH2 of module address 1
Z-TIO 1 (module address: 0) Z-DIO 1 (module address: 16)
CH1
Memory area transfer
Address of interacting modules 16
Specify the Z-DIO module address
Channel selection of interacting modules 1
Factory set value (Setting is not effective because Z-DIO is selected)
Selection switch of interacting modules 1
Specify 1(Interact with other channels) in the memory area number
CH2
Memory area transfer
Address of interacting modules

1 or 0
Specify the home module
Channel selection of interacting modules 1
Specify CH1 of the home module
Selection switch of interacting modules 1
Specify 1(Interact with other channels) in the memory area number
Z-TIO 2 (module address: 1)
CH1
Memory area transfer
Address of interacting modules 16
Specify the Z-DIO module address
Channel selection of interacting modules 1
Factory set value (Setting is not effective because Z-DIO is selected)
Selection switch of interacting modules 1
Specify 1(Interact with other channels) in the memory area number
CH2
Memory area transfer
Address of interacting modules

1 or 1
Specify the home module
Channel selection of interacting modules 1
Specify CH1 of the home module
Selection switch of interacting modules 1
Specify 1(Interact with other channels) in the memory area number
* In the above example, the memory area numbers of all channels of the two linked Z-TIO modules are changed at once at the timing of
the DI signals (DI1 to DI3) of the Z-DIO module.
The interval from the change of the setting signal specified as the master channel to the change of
the data of the linked channels may be as long as 250 ms in some cases.
Interacting *
Interacting *
Memory area
transfer
(1 to 8)
DI1
DI2
DI3
DI4
DI5
DI6
DI7
DI8
Memory area
setting signal
Auto/Manual
transfer
Interlock
release
Operation
mode
DI function assignment: 1
(See above for assignments)
Inte
rac
ting
*
Inte
rac
ting
*