RKC INSTRUMENT Z-TIO-G, Instruction Manual, Page: 169 / 246

9. COMMUNICATION DATA DESCRIPTION
IMS01T28-E4
9-61
Force ON of Event 1 action
RKC communication
identifier
OA
Modbus
register address
ch1: 01BAH (442)
ch2: 01BBH (443)
Force ON of Event 2 action RKC communication
identifier
OB
Modbus
register address
ch1: 01D6H (470)
ch2: 01D7H (471)
Force ON of Event 3 action
RKC communication
identifier
OC
Modbus
register address
ch1: 01F2H (498)
ch2: 01F3H (499)
Force ON of Event 4 action RKC communication
identifier
OD
Modbus
register address
ch1: 020EH (526)
ch2: 020FH (527)
Select the operation state that is output (force ON) as the event action.
Attribute:
R/W
Digits:
7 digits
Number of data:
2 (Data of each channel)
Data range: RKC communication:
ASCII code data
The event action is assigned as a digit image in ASCII code data of 7 digits.
ASCII code data of 7 digits:
Most significant digit ············ Least significant digit
Data:
0: Invalid 1: Valid
Modbus:
0 to 15 (bit data)
The event action is assigned as a bit image in binary numbers.
Bit image: 0000000000000000
Bit 15 ······················ Bit 0
Bit data: 0: Invalid
1: Valid
Factory set value:
0
Related parameters:
Input error determination point (high/low) (P. 9-48),
Action (high/low) at input error (P. 9-70)
This setting is not effective when the event type is “0: None.”
The Force ON of Event 4 action is not effective when the Event 4 type corresponds to “9: Control
loop break alarm (LBA).”
Continued on the next page.
Least significant digit:
Event output turned on at input error occurrence
2nd digit: Event output turned on in Manual mode
3rd digit: Event output turned on during the Autotuning (AT) function is being executed
4th digit: Event output turned on during the Setting change rate limiter is being operated
5th to Most significant digit:
Unused
Bit 0: Event output turned on at input error
occurrence
Bit 1: Event output turned on in Manual mode
Bit 2: Event output turned on during the
Autotuning (AT) function is being executed
Bit 3: Event output turned on during the Setting
change rate limiter is being operated
Bit 4 to Bit 15: Unused