RKC INSTRUMENT Z-TIO-G, Instruction Manual, Page: 114 / 246

9. COMMUNICATION DATA DESCRIPTION
IMS01T28-E4
9-6
Error code
RKC communication
identifier ER
Modbus
register address 000CH (12)
Each error state of the Z-TIO module is expressed in bit data items.
Attribute:
RO
Digits:
7 digits
Number of data:
1 (Data of each module)
Data range:
RKC communication:
Transmission data from the SRZ is replaced with ASCII code in decimal number.
1: Adjustment data error
2: Data back-up error
4: A/D conversion error
32: Logic output data error
When two or more errors occur, the error code is the sum of the generated errors.
Modbus: 0 to 63 (bit data)
Error status is assigned to each bit in the binary number.
Bit image: 0000000000000000
Bit 15 ····················· Bit 0
Bit data: 0: OFF 1: ON
Factory set value:

Manipulated output value (MV) monitor
RKC communication
identifier O1
Modbus
register address ch1: 000DH (13)
ch2: 000EH (14)
Manipulation output for PID control.
Attribute:
RO
Digits:
7 digits
Number of data:
2 (Data of each channel)
Data range:

5.0 to

105.0 %
Factory set value:

Related parameters:
Bit 0: Adjustment data error
Bit 1: Data back-up error
Bit 2: A/D conversion error
Bit 3: Unused
Bit 4: Unused
Bit 5: Logic output data error
Bit 6 to Bit 15: Unused