RKC INSTRUMENT Z-TIO-G, Instruction Manual, Page: 36 / 246

4. MOUNTING
4-6
IMS01T28-E4
4.4 DIN Rail Mounting and Removing

Mounting procedures
1.
Pull down the mounting bracket at the bottom of the module (A). Attach the hooks on the top of the
module to the DIN rail and push the lower section into place on the DIN rail (B).
2.
Slide the mounting bracket up to secure the module to the DIN rail (C).
(B)
Push
Mounting
bracket
DIN rail
(A) Pull down
(C) Locked
3.
Mount the modules on the DIN rail. Slide the modules until the modules are closely joined together
and the joint connectors are securely connected.
Joint connector
( Front view of module mainframe )
4.
Push in the mounting brackets to lock the modules together and fix to the DIN rail.
( Rear view of base )
Push in all of the mounting brackets.
Mounting
bracket
State where
each module is
locked.