RKC INSTRUMENT Z-TIO-G, Instruction Manual

Page: 222 / 246

11. SPECIFICATIONS
IMS01T28-E4
11-6

Indication lamp
Number of indicates: 2 points
Indication contents:

Operation state indication (1 point)
When normal (RUN): A green lamp is on
Control is stopped due to the self-diagnosis (FAIL):
A green lamp flashes
Action is stopped due to the self-diagnosis (FAIL):
A red lamp is on

Communication state indication (1 point)
During data send and receive (RX/TX):
A green lamp turns on
 Control
Control method: Brilliant II PID control (Direct action/Reverse action is selectable)
Autotuning (AT): Enhanced AT (Brilliant II PID control)
 Brilliant II PID control
Overshoot suppression function: Reset feedback (RFB)
Setting range: a) Proportional band (P)
*

RTD input: 0 (0.0, 0.00) to Input span (unit:

C)
Varies with the setting of the decimal point position.
However, even if "3: Three decimal places" is set, the
maximum settable decimal places are 2.

Voltage input: 0.00 to 300.00

of input span
* 0 (0.0, 0.00): ON/OFF action
ON/OFF action differential gap: RTD input:
0 (0.0, 0.00) to Input span (unit:

C)
(Varies with the setting of the decimal point
position. However, even if "3: Three decimal
places" is set, the maximum settable decimal
places are 2.)
Voltage input: 0.00 to 100.00

of input span
b) Integral time (I): 0.0 to 3000.0 seconds
(0.0: Integral action OFF)
c) Derivative time (D): 0.0 to 3000.0 seconds
(0.0: Derivative action OFF)
d) Control response parameter:
Slow, Medium and Fast (3-step selection)
Internally fixed to Fast in case of P and PD actions.
e) Output limiter high: Output limiter low to

105.0

f) Output limiter low:

5.0

to Output limiter high
g) Output change rate limiter (up/down):
0.0 to 100.0

/seconds of manipulated output
(0.0: Output change rate limiter OFF)
Up/Down individual setting
h) Manual reset:

100.0 to

100.0

i) Manual output: Output limiter low to Output limiter high
j) Manipulated output value at STOP mode:

5.0 to

105.0

k) Derivative action: 0 (Measured value derivative),
1 (Deviation derivative)
l) Derivative gain: 0.1 to 10.0
m) Integral/Derivative time decimal point position:
1 (0.1 seconds setting)