RKC INSTRUMENT Z-TIO-G, Instruction Manual, Page: 130 / 246

9. COMMUNICATION DATA DESCRIPTION
IMS01T28-E4
9-22
Set value (SV)
RKC communication
identifier S1
Modbus
register address Single word ：
ch1: 008EH (142)
ch2: 008FH (143)
Double word
：
ch1: Lower word 2004H (8196)
Upper word 2005H (8197)
ch2: Lower word 2006H (8198)
Upper word 2007H (8199)
Set value (SV) is desired value of the control.
Attribute:
R/W
Digits:
7 digits
Number of data:
2 (Data of each channel)
Data range:
Setting limiter low to Setting limiter high
(Varies with the setting of the decimal point position. However, in case of
MODBUS single word, even if "3: Three decimal places" is set, the maximum
settable decimal places are 2.)
Factory set value:
RTD input: 0.00 (0.000)
Voltage (V) input: 0.000
Related parameters:
Input type (P. 9-45), Setting limiter high/low (P. 9-81)
Proportional band
RKC communication
identifier P1
Modbus
register address ch1: 0092H (146)
ch2: 0093H (147)
Use to set the Proportional band of the P, PI, PD and PID control.
Attribute:
R/W
Digits:
7 digits
Number of data:
2 (Data of each channel)
Data range:
RTD input: 0 (0.0, 0.00) to Input span (Unit:

C)
(Varies with the setting of the decimal point position.
However, even if "3: Three decimal places" is set, the maximum
settable decimal places are 2.)
Voltage (V) input: 0.00 to 300.00 % of input span
0 (0.0, 0.00):
ON/OFF action
Regardless of whether the mode is Auto mode or Manual
mode, the ON/OFF action remains effective.
Factory set value:
30.00
Related parameters:
Decimal point position (P. 9-46), Control action (P. 9-66),
ON/OFF action differential gap (upper/lower) (P. 9-69)