RKC INSTRUMENT Z-TIO-G, Instruction Manual, Page: 87 / 246

8. COMMUNICATION DATA LIST
IMS01T28-E4
8-5
Continued from the previous page.
No. Name
Iden-
tifier
Chan-
nel
Register address
Digits
Attri-
bute
Struc-
ture
Data range
Factory
set value
HEX DEC
22 Logic output
monitor 1 ED CH1 0044 68 7 RO M

RKC communication
Least significant digit:
Logic output 1
2nt digit: Logic output 2
3rd digit: Logic output 3
4th digit: Logic output 4
5th digit to Most significant digit:
Unused
Data 0: OFF
1: ON

Modbus
Bit data
Bit 0: Logic output 1
Bit 1: Logic output 2
Bit 2: Logic output 3
Bit 3: Logic output 4
Bit 4: Logic output 5
Bit 5: Logic output 6
Bit 6 to Bit 15: Unused
Data 0: OFF
1: ON
[Decimal number: 0 to 63]

23 Logic output
monitor 2 EE CH1
 
7 RO M Least significant digit:
Logic output 5
2nt digit: Logic output 6
3th digit to Most significant digit:
Unused
Data 0: OFF
1: ON

24 PID/AT transfer G1 CH1
CH2
0061
0062 97
98 1 R/W C 0: PID control
1: Autotuning (AT)
When the Autotuning (AT) is finished, the
control will automatically returns to 0: PID
control.
0
25 Auto/Manual transfer J1 CH1
CH2
0065
0066 101
102 1 R/W C 0: Auto mode
1: Manual mode
0
26 Remote/Local transfer C1 CH1
CH2
0069
006A
105
106 1 R/W C 0: Local mode
1: Remote mode
When performing remote control by
Remote setting input and also performing
Cascade control, transfer to the Remote
mode.
0
27
RUN/STOP transfer SR CH1 006D 109 1 R/W M 0: STOP (Control stop)
1: RUN (Control start)
0
28 Memory area transfer ZA CH1
CH2
006E
006F 110
111 7 R/W C 1 to 8 1
29 Interlock release AR CH1
CH2
0072
0073 114
115 1 R/W C 0: Normal state
1: Interlock release execution
0
30 Event 1 set value
(EV1)
★
A1 CH1
CH2
0076
0077 118
119 7 R/W C Deviation action, Deviation action
between channels:

Input span to +Input span *
Process action, SV action:
Input scale low to Input scale
high*
MV action:

5.0 to +105.0 %
If the Event type corresponds to “0:
None,” set to RO (Only reading data is
possible).
If Event 4 corresponds to “9: Control
loop break alarm (LBA),” the Event 4 set
value becomes RO (Only reading data is
possible).
*
Varies with the setting of the decimal
point position. However, even if "3:
Three decimal places" is set, the
maximum settable decimal places are 2.
50.00
31 Event 2 set value
(EV2)
★
A2 CH1
CH2
007A
007B 122
123 7 R/W C 50.00
32 Event 3 set value
(EV3)
★
A3 CH1
CH2
007E
007F 126
127 7 R/W C 50.00
33
Event 4 set value
(EV4)
★
A4 CH1
CH2
0082
0083 130
131
7 R/W C
50.00
★
Parameters which can be used in multi-memory area function
Continued on the next page.