RKC INSTRUMENT Z-TIO-G, Instruction Manual, Page: 142 / 246

9. COMMUNICATION DATA DESCRIPTION
IMS01T28-E4
9-34
Output distribution bias
RKC communication
identifier DW
Modbus
register address ch1: 00F2H (242)
ch2: 00F3H (243)
The bias which is added to the manipulated output value of the master channel that is distributed to slave
channels and output.
Attribute:
R/W
Digits:
7 digits
Number of data:
2 (Data of each channel)
Data range:

100.0 to

100.0 %
Factory set value:
0.0
Related parameters:
Output distribution selection (P. 9-32), Output distribution ratio (P. 9-34),
Output distribution master channel module address (P. 9-89),
Output distribution master channel selection (P. 9-90)
Output distribution ratio
RKC communication
identifier DQ
Modbus
register address ch1: 00F6H (246)
ch2: 00F7H (247)
The ratio (magnification) which is applied to the manipulated output value of the master channel that is
distributed to slave channels and output.
Attribute:
R/W
Digits:
7 digits
Number of data:
2 (Data of each channel)
Data range:

9.999 to

9.999
Factory set value:
1.000
Related parameters:
Output distribution selection (P. 9-32), Output distribution bias (P. 9-34),
Output distribution master channel module address (P. 9-89),
Output distribution master channel selection (P. 9-90)
Proportional cycle time
RKC communication
identifier T0
Modbus
register address ch1: 00FAH (250)
ch2: 00FBH (251)
Proportional cycle time is to set control cycle time for time based control output such as Voltage pulse for
SSR, Triac, Relay and Open-collector output.
Attribute:
R/W
Digits:
7 digits
Number of data:
2 (Data of each channel)
Data range:
0.1 to 100.0 seconds
Factory set value:
Relay contact output: 20.0
Voltage pulse output (V), Triac output (T) and Open-collector output (D): 2.0
Related parameters:
Output assignment (P. 9-50)
To set the Proportioning cycle, “0: Control output” must be set in the output assignment item.
This item becomes RO for the Voltage/Current output specification.