RKC INSTRUMENT Z-TIO-G, Instruction Manual, Page: 190 / 246

9. COMMUNICATION DATA DESCRIPTION
IMS01T28-E4
9-82
Operation mode assignment 1
(Logic output selection function)
Logic output 1 to 4
RKC communication
identifier EA
Modbus
register address ch1: 0332H (818)
ch2: 0333H (819)
Operation mode assignment 2
(Logic output selection function)
Logic output 5 to 6
RKC communication
identifier EB
Modbus
register address ch1: 0336H (822)
ch2: 0337H (823)
Assign operation modes to logic outputs 1 to 6.
Switch between the preset operation modes by turning on and off the logic output.
Attribute:
R/W
Digits:
7 digits
Number of data:
2 (Data of each channel)
Data range:
0: No assignment
1: Operation mode (Monitor/Control)[0: Monitor, 1: Control]
2: Operation mode (Monitor

Event function/Control)
[0: Monitor

Event function, 1: Control]
3: Auto/Manual [0: Auto mode, 1: Manual mode]
4: Remote/Local [0: Local mode, 1: Remote mode]
5: Unused (Do not set this one)
Factory set value:
Operation mode assignment 1: 0
Operation mode assignment 2: 0
Related parameters:
Logic output monitor (P. 9-12), Output assignment (P. 9-50),
Communication switch for logic (P. 9-38)
For the block diagram of Logic output selection function, refer to
12. APPENDIX (P. 12-5).