RKC INSTRUMENT Z-TIO-G, Instruction Manual, Page: 15 / 246

1. OUTLINE
IMS01T28-E4
1-7

Base
Mounting holes (M3 screw)
Holes for screws to fix the base to
a panel, etc.
Customer must provide the M3 screws.
Power supply terminals
Supply power to only one of the joined
modules, and all of the joined modules will
receive power.
(Refer to
5.1 Wiring Cautions )
Used to mechanically and electrically connect
each module.
Joint connector
Communication terminals (RS-485)
Connect communication wires to only one of
the joined modules, and all of the joined
modules will communicate.
Mounting bracket
Used to fix the module on DIN rails and
also to fix each module joined together.
(Rear)
(Front)