RKC INSTRUMENT Z-TIO-G, Instruction Manual

Page: 209 / 246

9. COMMUNICATION DATA DESCRIPTION
IMS01T28-E4
9-101
Output adjustment mode
RKC communication
identifier bs
Modbus
register address

Used to select the output accuracy for Voltage/Current outputs.
Attribute: R/W
Digits:
7 digits
Number of data: 2 (Data of each channel)
Data range:
0: Normal operation
1: Output adjustment 5 %
2: Output adjustment 100 %
Factory set value: 0
Related parameters:
Output adjustment value 5 % (P. 9-101), Output adjustment value 100 % (P. 9-102)
Function: The output accuracy at the time of shipment (without output adjustment) is

3 % of
the span. Output adjustment improves the accuracy to

0.5 % of the span.
[Output adjustment procedure]
1.
Connect a multimeter or equivalent so that the output from the Z-TIO-G can be
measured.
2. Set the Output adjustment mode to “1: Output adjustment 5 %.”
3.
Change the output adjustment 5 % data so that the output from the Z-TIO-G
becomes 5 %.
4.
Set the Output adjustment mode to “2: Output adjustment 100 %.”
5.
Change the output adjustment 100 % data so that the output from the Z-TIO-G
becomes 100 %.
This parameter is active when the control is stopped (STOP) and when the instrument has
Voltage/Current output.
Output adjustment 5 %
RKC communication
identifier bt
Modbus
register address

This parameter is used to adjust the accuracy when the Voltage/Current output is 5 %.
Attribute: R/W
Digits:
7 digits
Number of data: 2 (Data of each channel)
Data range:
0 to 10000
Factory set value: 2195
Related parameters:
Output adjustment mode (P. 9-101), Output adjustment 100 % (P. 9-102)
This parameter is active when control is stopped (STOP), when output type is Voltage/Current,
and when the Output adjustment mode is other than zero.