RKC INSTRUMENT Z-TIO-G, Instruction Manual

Page: 27 / 246

3. COMMUNICATION SETTINGS
IMS01T28-E4
3-5
3.3 Loader Communication Setting
The loader communication has a preset configuration for module address, communication speed,
communication protocol and data bit configuration of the Z-TIO-G module. Communication setup is not
required for the Z-TIO-G module.
Adjust the communication setting on the host side same as that for the Z-TIO-G module.
Address, communication speed, communication protocol and data bit configuration
at the time of loader communication.
Name Data (fixed value)
Address 0
Communication speed 38400 bps
Communication protocol RKC communication
Based on ANSI X3.28-1976 subcategories 2.5 and B1
Data bit configuration Data bit: 8
Parity bit: Without
Stop bit: 1