RKC INSTRUMENT Z-TIO-G, Instruction Manual, Page: 226 / 246

11. SPECIFICATIONS
IMS01T28-E4
11-10

Logic output function
Number of logic output points: 6 points
Input: Event output 1 (CH1, CH2), Event output 2 (CH1, CH2),
Event output 3 (CH1, CH2), Event output 4 (CH1, CH2),
Communication switch for logic 1 and 2,
FAIL signal
Output assignment selection (each output terminal):
0 (Control output), 1 (Logic outputs result)
Operation mode assignment selection:
0 (No assignment)
1 (Monitor/Control)
2 (Monitor

Event function/Control)
3 (Auto/Manual)
4 (Remote/Local)
5 (Unused [Do not set this one])
Additional function: Energized/De-energized: 0 (Energized), 1 (De-energized)
Can be selected for each logic output 1 and 2
(OUT1, OUT2)
 SV select function
 Remote SV function
Setting range: SV select function: 0 (Remote SV function)
Master channel module address:

1, 0 to 99
Master channel selection: 1 to 99
RS digital filter: 0.0 to 100.0 seconds (0: Filter OFF)
RS bias:

Input span to

Input span
RS ratio: 0.001 to 9.999
 Cascade control
Setting range: SV select function: 1 (Cascade control function)
Master channel module address:
Common to Remote SV function setting
Master channel selection: Common to Remote SV function setting
Cascade bias: Common to RS bias setting
Cascade ratio: Common to RS ratio setting
Cascade filter: Common to RS digital filter setting
 Output distribution function
Setting range: Output distribution master channel module address:

1, 0 to 99
Master channel selection: 1 to 99
Output distribution bias:

100.0 to

100.0 %
Output distribution ratio:

9.999 to

9.999
Output distribution selection: 0 (Control output),
1 (Distribution output)