RKC INSTRUMENT Z-TIO-G, Instruction Manual, Page: 137 / 246

9. COMMUNICATION DATA DESCRIPTION
IMS01T28-E4
9-29
PV bias
RKC communication
identifier PB
Modbus
register address ch1: 00D2H (210)
ch2: 00D3H (211)
PV bias adds bias to the Measured value (PV). The PV bias is used to compensate the individual variations
of the sensors or correct the difference between the Measured value (PV) of other instruments.
Attribute:
R/W
Digits:
7 digits
Number of data:
2 (Data of each channel)
Data range:

Input span to +Input span
(Varies with the setting of the decimal point position.)
For the 1/1000
°
C unit, the minimum value limited to “

99.999.”
Factory set value:
0.00 (0.000)
PV digital filter
RKC communication
identifier F1
Modbus
register address ch1: 00D6H (214)
ch2: 00D7H (215)
This item is the time of the first-order lag filter to eliminate noise against the measured input.
Attribute:
R/W
Digits:
7 digits
Number of data:
2 (Data of each channel)
Data range:
0.0 to 100.0 seconds
(0.0: Unused)
Factory set value:
0.0
PV ratio
RKC communication
identifier PR
Modbus
register address ch1: 00DAH (218)
ch2: 00DBH (219)
PV ratio is a multiplier to be applied to the Measured value (PV). The PV ratio is used to compensate the
individual variations of the sensors or correct the difference between the Measured value (PV) of other
instruments.
Attribute:
R/W
Digits:
7 digits
Number of data:
2 (Data of each channel)
Data range:
0.500 to 1.500
Factory set value:
1.000