RKC INSTRUMENT Z-TIO-G, Instruction Manual, Page: 84 / 246

8. COMMUNICATION DATA LIST
8-2
IMS01T28-E4
8.1 Reference to Communication Data List
No. Name
Iden-
tifier
Chan-
nel
Register address
Digits
Attri-
bute
Struc-
ture
Data range
Factory
set value
HEX DEC
1
Model code
ID
  
32 RO M Model code (character)

2
ROM version
VR
  
8 RO M
ROM version

3 Measured value (PV) M1 CH1
CH2
0000
0001 0
1 7 RO C Input scale low to Input scale high
Varies with the setting of the decimal
point position.

(1) Name: Communication data name
(2) Identifier: Communication identifier of RKC communication
(3) Channel: Channel numbers of each Z-TIO module
(4) Register address:
Register addresses of each channel (HEX: Hexadecimal DEC: Decimal)
(5) Digits: The number of communication data digits in RKC communication
(6) Attribute:
A method of how communication data items are read or written when viewed from the
host computer is described
RO: Read only data
R/W: Read and write data
(7) Structure: C: Data for each channel
M: Data for each module
(8) Data range: Read or Write range of communication data

ASCII code data (Example: 7 digits)

16-bit data (bit image)
(9) Factory set value:
Factory set value of communication data
Communication data includes both Normal setting data and Engineering setting data.
The Engineering setting data should be set according to the application before setting
any parameter related to operation. Once the Engineering setting data are set correctly,
no further changes need to be made to parameters for the same application under
normal conditions. If they are changed unnecessarily, it may result in malfunction or
failure of the instrument. RKC will not bear any responsibility for malfunction or failure
as a result of improper changes in the Engineering setting.
Host computer
Data direction
SRZ
Host computer
Data direction
SRZ
(1) (2) (3) (4) (5) (6) (7) (8) (9)
Most significant digit Least significant digit
…………
Bit 15 Bit 0
…………….……………………