RKC INSTRUMENT Z-TIO-G, Instruction Manual

Page: 179 / 246

9. COMMUNICATION DATA DESCRIPTION
IMS01T28-E4
9-71
Manipulated output value at input error
RKC communication
identifier OE
Modbus
register address ch1: 0256H (598)
ch2: 0257H (599)
When the measured value reaches Input error determination point and Action at input error is set to “1:
Manipulated output value at input error,” this manipulated value is output.
Attribute:
R/W
Digits:
7 digits
Number of data:
2 (Data of each channel)
Data range:

105.0 to

105.0 %
Factory set value:
0.0
Related parameters:
Action (high/low) at input error (P. 9-70), Output limiter high/low (P. 9-73)
The actual output value becomes the value restricted by the output limiter.
Manipulated output value at STOP mode
RKC communication
identifier OF
Modbus
register address ch1: 025AH (602)
ch2: 025BH (603)
Manipulated output value to be output at STOP (control stop).
Attribute:
R/W
Digits:
7 digits
Number of data:
2 (Data of each channel)
Data range:

5.0 to

105.0 %
Factory set value:

5.0
Related parameters:
RUN/STOP transfer (P. 9-16), Operation mode (P. 9-37)