RKC INSTRUMENT Z-TIO-G, Instruction Manual

Page: 158 / 246

9. COMMUNICATION DATA DESCRIPTION
IMS01T28-E4
9-50
Output assignment
(Logic output selection function)
RKC communication
identifier E0
Modbus
register address ch1: 019AH (410)
ch2: 019BH (411)
This is used to assign the output function (control output, logic output result and FAIL output) for the
output 1 (OUT1) and output 2 (OUT2).
Attribute:
R/W
Digits:
1 digit
Number of data:
2 (Data of each channel)
Data range:
0: Control output
1: Logic output result
2: FAIL output
Factory set value:
Output 1 (OUT1): 0
Output 2 (OUT2): 0
Related parameters:
Energized/De-energized (P. 9-51), Event type (P. 9-52),
Communication switch for logic (P. 9-38)

: Valid

: Invalid
Output
assignment
Output type
Relay contact Voltage pulse Voltage output Current output Triac Open-collector
0 (Control output)
     
1 (Logic output
resulet)
     
2 (FAIL output)
     
For the block diagram of Logic output selection function, refer to
12. APPENDIX (P. 12-5).
[Relation between output assignment and output type]