RKC INSTRUMENT Z-TIO-G, Instruction Manual

Page: 198 / 246

9. COMMUNICATION DATA DESCRIPTION
IMS01T28-E4
9-90
Output distribution master channel
selection
RKC communication
identifier DZ
Modbus
register address ch1: 034AH (842)
ch2: 034BH (843)
In the slave channel, select the channel number that will be the master in the master channel module.
Attribute:
R/W
Digits:
7 digits
Number of data:
2 (Data of each channel)
Data range:
1 to 99
Factory set value:
1
Related parameters:
Output distribution selection (P. 9-32),
Output distribution master channel module address (P. 9-89)
Example: Combining the master channel and slave channels as shown below
Module address CH
Input Output
Master channel
Module address 0 CH1
Sensor input Control output
Slave channel
Module address 0 CH2 Distribution output
Module address 1 CH1 Distribution output
Module address
0
Module address
1
C
H
1 In
p
ut
CH
2
Out
put
CH
1
Out
p
ut
CH
1
Out
p
ut
There is no need for this setting (selecting the master channel) in the master channel.
In slave channel CH2 of module
address 0 and slave channel CH1 of
module address 1, set “1 (CH1),” the
master channel number of the
corresponding master channel module.
Addres setting switch
Master channel
Slave channel
Slave channel