RKC INSTRUMENT Z-TIO-G, Instruction Manual, Page: 3 / 246

IMS01T28-E4
i-1
Thank you for purchasing this RKC product. In order to achieve maximum performance and ensure proper
operation of the instrument, carefully read all the instructions in this manual. Please place the manual in a
convenient location for easy reference.
SYMBOLS
: This mark indicates that all precautions should be taken for safe usage.
: This mark indicates important information on installation, handling and operating
procedures.
: This mark indicates supplemental information on installation, handling and
operating
procedures.
: This mark indicates where additional information may be located.

Various symbols are used on the equipment, they have the following meaning.
: Direct current : Alternating current
: Safety precaution (Refer to the this Manual)
 An external protection device must be installed if failure of this instrument
could result in damage to the instrument, equipment or injury to personnel.
 All wiring must be completed before power is turned on to prevent electric
shock, fire or damage to the instrument and the equipment.
 This instrument must be used in accordance with the specifications to prevent
fire or damage to the instrument and the equipment.
 This instrument is not intended for use in locations subject to flammable or
explosive gases.
 Do not touch high-voltage connections such as power supply terminals, etc. to
avoid electric shock.
 RKC is not responsible if this instrument is repaired, modified or
disassembled by other than factory-approved personnel. Malfunction may
occur and warranty is void under these conditions.
: This mark indicates precautions that must be taken if there is danger of electric
shock, fire, etc., which could result in loss of life or injury.
: This mark indicates that if these precautions and operating procedures are not taken,
damage to the instrument may result.
CAUTION
WARNING
!
!
WARNING
!