RKC INSTRUMENT Z-TIO-G, Instruction Manual, Page: 117 / 246

9. COMMUNICATION DATA DESCRIPTION
IMS01T28-E4
9-9
Output state monitor
RKC communication
identifier Q1
Modbus
register address 0039H (57)
ON/OFF state of output (OUT1 and OUT2) is expressed as a bit image in decimal number.
Attribute:
RO
Digits:
7 digits
Number of data:
1 (Data of each module)
Data range: RKC communication:
ASCII code data
The output state is assigned as a digit image in ASCII code data of 7 digits.
ASCII code data of 7 digits:
Most significant digit ············ Least significant digit
Data: 0: OFF 1: ON
Modbus:
0 to 3 (bit data)
The output state is assigned as a bit image in binary numbers.
Bit image: 0000000000000000
Bit 15 ······················· Bit 0
Bit data: 0: OFF 1: ON
Factory set value:

Related parameters:
Output assignment (P. 9-50)
When the output type is control output, this is only effective when time proportional output is
used.
Bit 0: OUT1
Bit 1: OUT2
Bit 2 to Bit 15: Unused
Least significant digit: OUT1
2nd digit:
OUT2
3rd digit to Most significant digit:
Unused