RKC INSTRUMENT Z-TIO-G, Instruction Manual

Page: 13 / 246

1. OUTLINE
IMS01T28-E4
1-5

Quick start code 2 (Initial setting code)
Quick start code 2 tells the factory to ship with each parameter preset to the values detailed as specified by
the customer. Quick start code is not necessarily specified when ordering, unless the preset is requested.
These parameters are software selectable items and can be re-programmed in the field via the manual.
□ □ □ □－
N
□
(1) (2) (3) (4) (5) (6)
Specifications
Quick start code 2 (Initial setting code)
(1) (2) (3) (4) (5) (6)
Event function 1 (EV1) * None N
Event function 1 (Refer to Event type code table) 
Event function 2 (EV2) * None N
Event function 2 (Refer to Event type code table) 
Event function 3 (EV3) * None N
Event function 3 (Refer to Event type code table) 
Temperature rise completion 6
Event function 4 (EV4) * None N
Event function 4 (Refer to Event type code table) 
Control loop break alarm (LBA) 5
CT type None N
Communication
protocol RKC communication (ANSI X3.28-1976) 1
Modbus 2
* If it is desired to specify the deviation action between channels or the deviation using local SV, the settings must be configured by the customer. (Engineering setting data)
 Event type code table
Code Type Code Type Code Type
A Deviation high H Process high V SV high
B Deviation low J Process low W SV low
C Deviation high/low K Process high with hold action 1 MV high
D Band L Process low with hold action 2 MV low
E Deviation high with hold action Q Deviation high with re-hold action
F Deviation low with hold action R Deviation low with re-hold action
G Deviation high/low with hold action T Deviation high/low with re-hold action