RKC INSTRUMENT Z-TIO-G, Instruction Manual

Page: 19 / 246

2. SETTING PROCEDURE TO OPERATION
IMS01T28-E4
2-3
Use Host communication to configure communication data in the Z-TIO-G modules.
(Engineering data and operation data, etc.)
If the Z-TIO-G module is set to control start (RUN), switch to control stop
(STOP).
Engineering data can only be set in Z-TIO-G modules when the Z-TIO-G
module is stopped.
For communication data, refer to
8. COMMUNICATION DATA LIST (P. 8-1) .
For function description of communication data, refer to 9. COMMUNICATION
DATA DESCRIPTION (P. 9-1) .
When a Z-TIO-G module is set to RUN, the setting becomes valid and the control is
started.
A
Operation start
Control RUN
(Z-TIO-G modules)
Power ON
(Host computer and SRZ)
Set the SRZ setting data
via Host communication