RKC INSTRUMENT Z-TIO-G, Instruction Manual, Page: 144 / 246

9. COMMUNICATION DATA DESCRIPTION
IMS01T28-E4
9-36
Manual manipulated output value
RKC communication
identifier ON
Modbus
register address ch1: 0102H (258)
ch2: 0103H (259)
Use to set the output value in the Manual control.
Attribute:
R/W
Digits:
7 digits
Number of data:
2 (Data of each channel)
Data range:
Output limiter low to Output limiter high
Factory set value:
0.0
Related parameters:
Output limiter high/low (P. 9-73)
The output of the ON/OFF action in the Manual mode is as follows.
・
When Manual manipulated output value

Output limiter (low) (or 0.0 % or less)
→
Output limiter (low)
・
When Manual manipulated output value

Output limiter (low) (or 0.0 % or less)
→
Output limiter (high)
Area soak time stop function
RKC communication
identifier RV
Modbus
register address ch1: 0106H (262)
ch2: 0107H (263)
Select the event for which the Area soak time is to be stopped when an event state occurs.
Attribute:
R/W
Digits:
1 digit
Number of data:
2 (Data of each channel)
Data range:
0: No function 3: Event 3
1: Event 1 4: Event 4
2: Event 2
Factory set value:
0
Related parameters:
Area soak time (P. 9-27)
Function:
The Area soak time stop function stops the Area soak time count when an event
state occurs at the specified event output during soak operation. When the event
state is cleared, the area soak time count stop is canceled and soak operation
resumes from the state immediately prior to the stop.
Measured value (PV)
Set value (SV) of
Memory area 1
Area soak time of Memory area 1: 10 minutes
Area soak time stop function:
1 (Event 1)
Time
Present set value
(SV)
Event 1 state
occurs
Soak operation
(3 minutes)
Area soak time
stop
(2 minutes)
Event 1 state
cleared
Soak operation resumes
(Remaining operation time is
7 minutes)
Example: