RKC INSTRUMENT Z-TIO-G, Instruction Manual, Page: 33 / 246

4. MOUNTING
IMS01T28-E4
4-3

Depth for connector mount type module (Connector type)
Space for connectors and cables must be considered when installing.
76.9 mm Approx. 50 mm
Connector
(Plug)

Mounting the joint connector cover
It is recommended to use a plastic cover on the connector on both sides of the mounted modules for
protection of connectors.
Joint connector cover (Standard equipment)
Parts code Ordering code Q’ty
KSRZ-517A 00433384 2
Joint connector cover

Installing direction of SRZ unit
Mount the SRZ unit in the direction specified as shown below.
Top
Bottom
(5)
In case this instrument is connected to a supply by means of a permanent connection, a switch or
circuit-breaker shall be included in the installation. This should be in close proximity to the equipment
and within easy reach of the operator. It should be marked as the disconnecting device for the
equipment.