Page 1: ......
Page 2: ...ronising button of the transmitter 2 The transmitter s LED will illuminate to denote synchronising signal transmitted 3 The channel number on the receiver s LED will become the same as the transmitter s which means the receiver has been successfully synchronised 1 Press the SYNC button of the receiver 2 The transmitter s LED will illuminate to denote synchronising signal received 3 The channel num...
Page 3: ... encountered reducing the squelch level of the receiver will make it less susceptible to interference To operate the squelch setting 1 Press p up or q down button to turn to the squelch setting page 2 Hold SET button until icon SET flashes to denote readiness for setting 3 Press p up or q down button to select a new squelch level between 1 and 10 4 After a level is chosen press SET button or wait ...
Page 4: ...ct To make a claim under this Warranty valid proof of purchase must be presented when the warranty claim is made along with any other required information The Warranty offered by NAS is not transferable The Warranty will only apply if your NAS product has been installed and used in accordance with NAS s recommendations as noted in the operating instructions Warranty Exclusions The Warranty does no...
