Qnergy PowerGen 5650 Series, Installation & Operation Manual

Page: 172 / 194

P
OWER
G
EN
R
EPORTS AND
C
HECKLISTS
160
19.4 POWERGEN ANNUAL INSPECTION CHECKLIST
Annual Inspection
Start Time: ____________AM PM End Time: ____________AM PM
Table 19-7 General Information
General Information
Customer Name
Site Name
Annual Inspection Date
PowerGen Serial Number
Technician Name/Distributor Name
# PowerGen Annual Inspection Checklist Initials
1 Inspect the flue, fuel piping, and electrical connections for signs
of damage, blockage, or deterioration
2 Inspect the cabinet filter. If filter is dirty and/or damaged clean or
replace the filter
3 Check the internal coolant loop for signs of leaks (Hoses, fittings,
joints)
4 Inspect the burner seal (flexible) for evidence of degradation
(such as, cracking, discoloration, or powder) on its external
surfaces
5 Use gas detection meter or snoop (liquid soap and water) and
check for gas leaks on all gas line connections. If a leak is found
correct issue prior to restarting the PowerGen
6 Coolant level within 2” from over flow tank cap:
Yes No, note level top-off:
7 Inspect the PowerGen HRU (Heat Reduction Unit) clean radiator
with nylon bristle brush and/or cleaning fluids