Qnergy PowerGen 5650 Series, Installation & Operation Manual

Page: 80 / 194

I
NSTALLATION
P
ROCEDURE
68
Figure 11-3 PowerGen FPC Expansion Board Terminal Blocks, Customer Connection Points
11.3.5 External (Customer) Emergency Stop connection
Located on the FEB, the PowerGen emergency stop (Orange Terminal Block) circuit is a normally
open, discrete input (dry contact) allowing the customer to enable/disable the system. For
further information please contact Qnergy Customer Support.
Table 11-5 PowerGen FPC Expansion Board Terminal Block Description
Inputs Position Designation Wire Gauge
1 through 6 Discrete Input (Use
potential free dry-contact)
16 - 20
Outputs Position Designation Wire Gauge
1 through 8 Normally open relay
output contact rated 1A
Max Current at
24VDC/250VAC.
16 - 20