Q
NERGY
L
YNX
S
OFTWARE
55
Figure 6-53 Qnergy Lynx, Setpoints, Modified Condition
• Once the correct value is inserted, press the “SET” button to activate the new setting.
• If you type in an unacceptable value, a “RED” border will appear around the box.
Figure 6-54 Qnergy Lynx, Setpoints, Illegal Condition
• If you move the computer mouse over the setpoint value, a box will appear with
acceptable data points for the particular parameter.
• Type in an acceptable value and then click “SET”.
Figure 6-55 Qnergy Lynx, Setpoints, Acceptable Values
6.6 FPC, FEB & QEC FIRMWARE UPDATE
CAUTION:
Make sure that you have the most up-to-date
firmware file available from Qnergy customer support. Do not
disconnect the communication cables or turn off the power
during the firmware upgrade process!
Summary of Contents for PowerGen 5650 Series
