Qnergy PowerGen 5650 Series, Installation & Operation Manual

Page: 124 / 194

F
AULT
M
ESSAGES
, P
OWER
G
EN
112
C:\ProgramData\Qnergy\Logs
See “Fault Messages, PowerGen” on page 112 for detailed description of PowerGen Fault Codes.
15. FAULT MESSAGES, POWERGEN
15.1 FPC & QEC FAULT MESSAGES
When a fault occurs, the PowerGen will display the name of the fault in the table. Table 15-2,
Table 15-3, Table 15-4, Table 15-5, and Table 15-6 lists the faults and their possible causes.
Table 15-1 PowerGen Error Messages Levels Explained
PowerGen Fault Levels Explained
Service Required System will shut down and be inoperable until service is
performed and the fault is cleared by an authorized service
personnel.
User Clearable System will shut down and be inoperable until the user
acknowledges/clears the fault.
Auto Reset PowerGen will automatically re-start when the fault condition is
resolved.
Warning System operation will continue as normal but a warning will be
presented.
Informative System operation continues as normal and no visual indication is
presented. Events are logged and presented in the fault list.