Qnergy PowerGen 5650 Series, Installation & Operation Manual

Page: 87 / 194

C
OMMISSIONING
P
ROCEDURE
75
12.3 OPT-CONNECT CELL MODEM INSTALL
The PowerGen now comes with the Opt-Connect Cell Modem pre-installed. The pre-installed
modem will work with both Verizon and AT&T cell networks. If your system does not have a
modem pre-installed, please contact Customer Support.
12.4 LYNX QEC3.5 CONFIGURATION FOR COMMISSIONING
Note: Prior to commissioning the PowerGen please verify that the field support laptop is
configured with the following.
• Qnergy Lynx Software v0.4.0 or greater.
• QEC Firmware v3.1.0 or greater.
• QEC3.5 hardware version (QEC serial number starts with a 5xxxxxxxx).
CAUTION: Disconnect customer electrical load prior
to enabling the PowerGen for the first time and
while commissioning the PowerGen.
Contact Qnergy Customer Support if unfamiliar
about how to correctly setup the PowerGen,
Qnergy Lynx Software: +1(801)413-7668 (Customer
Support Hotline).