door, with the next white tab outside. Then reprint the
badge (or pair of badges, if your system prints two
badges on a sheet of film).
2
Grasp the processing tab in the center and pull it
straight, at moderate speed and without hesitation, all
the way out.
This starts development of the picture.
3
Wait for the standard 60-second processing time to
elapse (see
Film processing time on page 7-8), when the
film recorder produces an audible signal and a green
LED flashes. When you hear and see these signals,
quickly separate the print from the negative, starting at
the end nearest the tab.
Never allow the print to fall back onto the negative. Do
not touch the surface of the print.
DATEX
Name
Dept.
Juana Pelaez
Engineering
ID-4000 output devices 7-7
