scroll through the list of names until the desired name
appears.
3
View the current lock settings for the displayed function.
(The current settings are checked in the Lock Setting box;
a user must have at least one of the checked keys to use
the function.)
4
Repeat steps 2 and 3 as needed to view all desired
ID-4000 functions and their associated keys.
5
Return to the System Management window by choosing
the Quit button.
Lock editing procedure
Use these steps to edit the locks on ID-4000 functions:
1
If you have not done so, display the Lock Edit window
(see page 5-50).
2
Use the Name box to choose an ID-4000 function.
You can click on the arrow on the right end of the box to
display a list, then click on the desired function to display
its name in the Name box. You can also press the TAB
key until the Name box changes to a blue background,
then use the UP ARROW and DOWN ARROW keys to
scroll through the list of names until the desired name
appears.
3
Choose the desired lock setting checkboxes (Op1, Op2,
Op3, Adm, etc.) to make the function accessible to users
who have at least one of the corresponding keys. If
necessary, select a checkbox again to remove the check.
4
Repeat steps 2 and 3 until access requirements have
been set for all necessary ID-4000 functions.
5
To accept all new requirements, choose Commit.
To abandon all new requirements and return the locks to
their previous state instead, choose Undo.
6
Return to the System Management window by choosing
the Quit button.
ID-4000 administration 5-51
