Starting up
Powering up the
system
1
If all ID-4000 components are connected to a power strip,
turn the power strip switch on to power up all
components simultaneously. Then go to step 2.
If your ID-4000 components are not connected to a
power strip, turn on the components in the following
order:
a
All input devices connected to your ID-4000 system (if
necessary, see Chapter 6 for power switch locations)
b
All output devices (if necessary, see Chapter 7 for
power switch locations)
c
The ID-4000 display (
A)
d
The ID-4000 computer (
B)
B
A
3-4
Getting started
