Capturing a signature
Use the following steps to capture an applicant’s
signature whenever the signature capture window
appears.
This window usually appears immediately following
portrait-capture, if your system is equipped to capture
signatures.
1
Ask the applicant to use the signature pad stylus and
normal pen pressure to write his or her signature on the
signature pad writing surface.
As the writing surface is signed, the signature appears in
the Signature Capture window.
2
If the signature is satisfactory, choose the OK button in
the Signature Capture window to display the next
window in the image-capture sequence.
If this signature is not satisfactory, choose Restart to
clear the signature from the window. Then return to
step 1.
6-16
ID-4000 input devices
