ONTRAK Synergy Integra, Operation Manual

Page: 26 / 350

2-2 INTEGRA Operations Revision A 7/26/00
20-0200-231 (CR), 20-0200-232 (Std), 20-0200-251 (CD)
SAFETY NOTATIONS
Safety is always a major concern when maintaining a piece of
equipment. In order to ensure that the safety messages presented in
this volume are visible and immediately recognizable, the following
symbols will accompany the various warnings and cautions.
A
NOTE:
Symbol identifies a safety issue that could result in a process failure.
B
CAUTION:
Symbol identifies a safety issue that could result in minor personal injury,
damage or destruction of machine components, or damage the processing product.
C
WARNING:
Symbol forewarns of severe physical damage to equipment and/or
personnel.
H
WARNING! ELECTRICAL HAZARD:
Symbol forewarns of an electrical hazard
which could result in personal injury or loss of life.
F
CAUTION! HOT SURFACE:
Symbol forewarns of a hot surface that could cause
burns if touched.
Z
DANGER! CHEMICAL HAZARD:
Symbol forewarns of possible chemical hazards.
V
WARNING! RESPIRATORY PROTECTION REQUIRED:
Symbol identifies
situations or conditions which require respiratory protection.
Q
WARNING! PINCH POINT:
Symbol identifies pinch points that can result in
personal injury (SEMI S1-90 standards).
M
WARNING! ENTANGLEMENT HAZARD:
Symbol forewarns of the possibility of
entanglement in moving machinery.
W
WARNING! RF VOLTAGE HAZARD:
Symbol forewarns of possible RF voltage.
O
WARNING! INFRARED RADIATION:
Symbol forewarns of possible danger from
infrared radiation.