ONTRAK Synergy Integra, Operation Manual

Page: 244 / 350

10-6 INTEGRA Operations Revision A 7/26/00
20-0200-231 (CR), 20-0200-232 (Std), 20-0200-251 (CD)
ALARM CONFIGURATION SCREEN
The majority of alarms are initiated by a sensor. In many cases, an
increment of time or an operating range (%) is connected to the
sensor signal in order to ensure the accurate performance of a
particular component.
In order to offer more flexibility to the Integra, an alarm
configuration system is available for modifying selected alarms.
Selectable Alarms
(Enabled or Disabled)
Four alarms are selectable and can only be enabled or disabled through
the
SELECT OPTIONS
screen. Access the
SELECT OPTIONS
screen
from the
MAIN screen
.
Alarm ID: 19 - Brush Station #1 Upper Brush Motor Speed Failure
Alarm ID: 20 - Brush Station #1 Lower Brush Motor Speed Failure
Alarm ID: 98 - Brush Station #2 Upper Brush Motor Failure
Alarm ID: 99 - Brush Station #2 Lower Brush Motor Failure
Programmable
Alarms
(Set Operating
Parameters)
Seven alarms are programmable in that various operating parameters
can be set in the
ENGINEERING OPTIONS
screen. Access the
ENGINEERING OPTIONS
screen, from the
ALARM CONFIGURATION
screen
. (See “Accessing Alarm Configuration Menu” below.)
Alarm ID: 134 - Brush
#
1 Low Chemical Flow
Alarm ID: 135 - Brush
#
2 Low Chemical Flow Alarm
Alarm ID: 136 - Failure Detected: Brush1 Edge Flow Sensor
Alarm ID: 137 - Failure Detected: Brush2 Edge Flow Sensor
Alarm ID: 138 - CDA Pressure Sensor
Alarm ID: 153 - Low Chem Flow in Line 1
Alarm ID: 154 - Low Chem Flow in Line 2
Process Recipe
Alarms
(Enabled or Disabled)
Two process recipe timeout alarms can be enabled or disabled. Access
the alarms through the
FIRST BRUSH STATION PROCESS DEFINE
and/or
SECOND BRUSH STATION PROCESS DEFINE
screen. Set the
three “Process Alarm Timeout” parameters.
Alarm ID: 158 - Brush #1 Process Alarm Timeout
Alarm ID: 159 - Brush #2 Process Alarm Timeout