ONTRAK Synergy Integra, Operation Manual

Page: 247 / 350

C h a p t e r 1 0 A L A R M S
7/26/00 INTEGRA Operations Revision A 10-9
20-0200-231 (CR), 20-0200-232 (Std), 20-0200-251 (CD)
Alarm Description
The fields (boxes) circled at the top of the illustration above, display
the identifying information for the alarm being configured. The
Alarm ID Number and Description also display in the CURRENT
ALARM box (bottom right) of the
SYSTEM STATUS
screen when an
alarm is signalled in the system. The Category field (box) is used as a
classification window for the messages displayed in the Alarm List.
Currently, the only category is Alarms. In the future, the Category
classifications will also include Warnings and Messages.
Configuration Options - Message Box
Access each alarm to determine which factors can be configured under
the current software version (ver. 2.2.3). Most alarms do not have
parameters that can be configured. The number of alarms that can be
configured (configurable parameters) will increase with each new
version of Integra software.
When an alarm is selected (see “Choosing an Alarm for
Configuration” below), the Message field (box) at the top right of the
screen displays information if an alarm can be configured. At the same
time, the Message field displays the alarm’s Configuration status
message. There are four types of messages that can display:
1 “Press on the desired alarm message in Alarm List.” Scroll
through the alarm list until the desired alarm is located. Touch
the alarm and it will be chosen. This is for choosing an alarm to
configure when no alarm is displayed.
2
“THIS ALARM IS NOT CURRENTLY CONFIGURABLE!”
Displays for alarms which have no configurable parameters.
100 BRUSH STATION 2 ROLLER MOTOR SPEED STANDARD
200 MM