9-3
Section
Creating the Sample Data
397
9-3-11 Creating the Alarm List Library Data
Create the library data that is displayed at the occurrence of an alarm.
Create the library data for FA20 to FA25. (For the library data creation procedure,
refer to 8-2 Library Editor.)
FA20
FA21
FA22
FA23
FA24
FA25
Set line 1.
Set line 2.
Check torque
screw.
Check pipe and
valve.
Detection near
entry. Confirm
safety before re-
starting the line.
Check the PC
(PLC) and the
network.
Reference: With the NT21, NT31, NT31C, NT631, and NT631C, the library data codes are
1000 to 3FFF. However, if NT20/30/620-compatible mode is used with the NT21,
NT31, NT31C, NT631, and NT631C, library code will be the same as NT30,
NT30C, NT620S, NT620C and NT625C.
Creating the library data of code FA20
(1) Select [Tools] (menu bar)
→
[Library Editor].
(2) Specify FA20 in the library table and click on
.
(3) Click the library creation area frame (dotted lines) that is displayed at the
upper left area in the library creation screen and drag the point at the lower
right corner. The mouse cursor position is displayed under the screen;
change the frame size to X=200, Y=200 (size: 200
200).
(4) Select [Objects] (menu bar)
→
[Fixed Display]
→
[Text].
(5) Click the mouse at the position where the character string is to be dis-
played (at the intended upper left corner of text).
(6) Set the properties as shown below.
Description
Set Line 1
Position
––
Font Type
Standard
Scale
1
2 (High)
Smoothing
Attribute
Inverse Flash
Color
Foreground
White
Background
Black