6-10
Section
Registering Created Elements (Symbol Manager Operation)
253
der the window. In the menu, if there is a check mark
to the left of [Status Bar], the status bar is displayed.
Help
Contents:
Displays the help information.
Search for Help on:
Enables you to display help information
on the input word.
About Symbol Manager:
Displays information such as the ver-
sion of the symbol manager.
Screen Operation
Double click on the folder or symbol name,
and the folder opens to display the list of
registered symbol data.
Double clicking on the folder or symbol
name while the list of the registered symbol
data is displayed causes the folder to close
so that only the folder name is displayed.
“+” indicates that symbol data is registered for the folder. “–”
is displayed when the folder is open.
Clicking on this has the same effect as double clicking on the
folder name.
Reference: Folders are displayed in the alphabetical order of the folder names. In a folder,
the list of symbol data displays the symbol data in the alphabetical order of the
symbol names.
6-10-3 Operating the Symbol Manager
Opening a folder (file)
Open a folder in which symbol data is registered.
By opening the symbol collections supplied with the Support Tool or the files
saved by the symbol manager (P274), it is possible to display the opened data in
the symbol manager and to use the required one for screen creation.
Reference:
The following symbol data files are supplied with the Support Tool.
Color Palette Symbol (ColorPL.SBL)
Keyboard/Keypad Collection (Spplmnt.SBL)
ISO Symbol Collections (ISO7000 (XXXX-XXXX).SBL) (CD-ROM version
only)
The opened folders (symbol data files) in the symbol manager remain dis-
played until they are closed. The symbol manager memorizes the folder con-
figuration when you quit the symbol manager last time and displays the same
state when you next start the symbol manager. (The symbol registration state
in the folder is the state when the folder was saved last.)
While registering a symbol from a screen or pasting it to a screen, the folder to
be used (symbol data file) should be opened. However, if the symbol data file
has a Read-only property, the characters “Read Only” are displayed in the
symbol manager. In this case, it is not possible to perform symbol registration.
