6-1
Section
Common Operation
123
Scale
Specify the character size. (Only 1
1 (Equal) and 2
1 (Wide) can be set for
NT11S/NT11.)
1
1 (Equal): A character is displayed in the original size both in height and
width.
1
2 (High):
A character is displayed with doubled height and the original
width.
2
1 (Wide):
A character is displayed with the original height and doubled
width.
2
2:
A character is displayed with doubled height and width.
3
3:
A character is displayed with threefold height and width.
4
4:
A character is displayed with fourfold height and width.
8
8:
A character is displayed with eightfold height and width (not
possible for NT20/NT20S).
1
1
1
2
2
1
2
2
3
3
4
4
8
8
Reference: With the NT21 and with the NT31, NT31C, NT631, NT631C “-V1” and above,
characters of 2
2 or larger scale are automatically displayed in 32 dot high-defi-
nition font. (Marks inserted into a string are always displayed in 16
16 dot font.)
32 dot font and font type ISO 8859-1 are not available on PT when system pro-
grams of “-V1” type and above, were installed for NT31, NT31C, NT631, NT631C
below “-V1,” even though other functions will be same as “-V1” and above type.
Therefore, in this case, characters of 2 x 2 or larger scale are displayed in 16 dot
font for PT, while they are displayed in 32 dot font for Support Tool. Also,
ISO8859-1 font type can not be used for PT, CP437 font type is applied.
Smoothing
Smoothing processing allows jags to be smoothed when a character is displayed
in an enlarged scale.
Selection of this item is possible for characters of 2
2 or larger and for marks
(16
16 dots). (With the NT21, NT31, NT31C, NT631, and NT631C, smoothing
is not performed for marks.)
Smoothing cannot be selected for NT20, NT20S and NT600S since smoothing
processing is always executed for characters larger than 2
2 with these mod-
els.
Without smoothing
With smoothing
Attribute
This is an attribute to determine how text is displayed. Attributes to be displayed
here vary somewhat according to the PT model.