Appendix C
NT Transfer Utility
495
How to use the NT Transfer Utility
Reference: For connection method of the NT Transfer Utility and PT, refer to 11-1-1 Connect-
ing to PT.
Start up and exiting the NT Transfer Utility
Starting up the NT Transfer Utility
To start up the NT Transfer Utility, select [Program] – [Omron] – [Ntst4.8] – [NT
Transfer Utility] starting from the Windows Start button. (Items to select vary
depending on the [Program Folder] setting specified on installation.)
The NT Transfer Utility starts up and displays the main window shown below.
Exiting the NT Transfer Utility
You can exit the NT Transfer Utility in any of the methods below.
Select [File] – [Exit].
Click on
at the upper right area of the main window.
Double click on the NT Transfer Utility icon at the upper left area of the main
window.
Click on the NT Transfer Utility icon at the upper left area of the main window
and select [Close] from the displayed control menu box.
Press F4 key while holding down the Alt key.
The screen returns to the Windows screen after the NT Transfer Utility is closed.
Communication Setting at the NT Transfer Utility
Set the baud rate and communication port at the NT Transfer Utility (personal
computer).
(1) Select [Configure] (menu bar)
→
[Comms. Setting].
The communication setting dialog box is displayed.
(2) Set the data for the displayed item
The meanings of the items are described below.