6-1
Section
Common Operation
128
In the dialog, PLC address can be set easily by selecting from the available
areas.
Example: Numeral table
(PLC Vendor : OMRON)
Example: Touch switch
(PLC Vendor : OMRON)
Channel (Word)
Select the type of word to be referred to from the list box.
Address
Input the address of word to be referred to.
Bit
Input the bit position in the word to be referred to.
Direct input of PLC address
It is possible to input PC (PLC) address, for example D00001, directly into the
address input field. You can input addresses easily when you know which area is
available.
When inputting PLC addresses, input a word address and a bit number without a
blank following a character that indicates area type. However, in case of numeral
table or string table, specification of bit number is not needed.
When you do not specify PLC address, input “- -” into the input field.
Input methods varies according to the PLC Vendor setting as listed below. Only
input method is described here. For details on specification method of PLC ad-
dress for PLC other than OMRON, refer to PC Connection Operation Manual
(V042-E1-
).
PLC Vendor: OMRON
Possible areas and characters that indicate area type are as follows:
Character
Area Type
Word
Bit
None
Common I/O Area
H
HR Area
A
AR Area
L
LR Area
T
Timers
C
Counters
D
Data Memory Area
E
EM Current Bank
E0
EM Bank 0 (CS/CJ–series PLCs)
1
1
E1
EM Bank 1 (CS/CJ–series PLCs)
1
1
E2
EM Bank 2 (CS/CJ–series PLCs)
1
1
E3
EM Bank 3 (CS/CJ–series PLCs)
1
1
E4
EM Bank 4 (CS/CJ–series PLCs)
1
1
