8-3
Section
Mark Editor
342
8-3
Mark Editor
Special symbols and marks can be created by tiling selected dots in a 16
16 dot
area. (For NT11S/NT11 it is 8
16 dot.)
The created mark data can be inserted into mark data displays and character
string displays.
Reference: The NT-series Support Tool cannot handle marks of 32
32 dots and 64
64
dots. If marks created by the DOS version Support Tool are imported, 32
32 or
64
64 dot size marks must be represented by dividing and grouping them as
16
16 dot size mark data.
8-3-1 Screen Configuration
The screen configuration of the mark editor is shown below.
Drawing toolbar
Standard toolbar
Image display area
Edit area
8-3-2 Creating Marks Using the Mark Editor
Displaying the mark editor
(1) [Tools] (menu bar)
→
[Mark Editor]
The mark data list dialog box is displayed.
In the mark data list dialog box, the mark data registered for the codes are
displayed.
(2) Select the code in the mark data list dialog box and click on
, or
double click the area corresponding to the code in the list.
