6-4
Section
Data Input
172
Input using touch switches (copy fu control code input function)
PT
No.1
No.2
No.3
No.4
No.5
50
50
50
Screen
Set
key
Input field
Numeral
memory table
Copying the
set data
Set
(1) Copy the preset data (numeral memory table entry or constant) to the input
field using the copy function allocated to a touch switch.
(2) Press the touch switch to which the
key code is allocated (by the control
code input function) to write the data that was copied (set) to the input field to
the specified numeral memory table entry.
Reference: To copy (in the numeral table) and display a numeral by a single key operation,
without using the
key code, use a touch switch (copy function) and a numeral
display element.
PT
No.1
No.2
No.3
No.4
No.5
50
50
50
Screen
Display field
Part type A
Numeral
memory table
Input using extended input (control code input function)
PT
No.1
No.2
No.3
No.4
No.5
50
50
key
Screen
Input field
Extended
input
Numeral
memory table
External
numeric keys
(1) By turning ON an external switch that is connected to an external input, the
numeral or the control code set for the extended input function can be input
to the numeral setting input field.
(2) Press the touch switch to which the
key code is allocated to write the data
set at the input field to the specified numeral memory table entry.
(For the setting of an extended input, refer to 7-5 Extended I/O Input Table.)
Operation procedure
Selection using the menu bar:
[Objects]
→
[Data Input]
→
[Numeral]
Selection using the drawing toolbar:
Related elements and settings
Touch switch (control code input):
[Objects]
→
[Touch Switch]
→
Control code input function