7-4
Section
Bit Memory Table
290
NT30, NT30C, NT620S, NT620C, and NT625C
Specify the screen No. of the screen to which the screen should switch by the
operation of the alarm list/history. Specify 0 if you do not switch the screen.
NT21, NT31, NT31C, NT631, and NT631C
Specify the screen No. of the screen to be displayed if a check mark is set for
[Switch Screen]. The setting for this item is not valid unless a check mark is set
for [Switch Screen].
String Table Entry
Specify the character string memory table entry (string table) number where the
character string that is displayed as a message is stored when the bit memory
table entry goes ON or the bit memory table entry registered for the alarm history
is displayed.
Image/Library Code
If you want to display image data or library data when a message is selected, set
a check mark in the check box and specify the image/library code after clicking on
or
.
Color – Foreground
Specify the color in which the message display field is displayed when a mes-
sage is selected.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
Code setting in the image/library code field
When setting a code in the image/library code field, the desired code can be
selected from the list as an alternative to direct input of a specified code using a
keyboard.
Setting the image data
To set an image code in the image/library code field by selecting image data
from the list, follow the procedure described below.
(1) Specify the image/library code field where the code is set.
(2) Click on
.
(3) Specify the image data from the list.
(4) Click on
.
The code of the specified image data is displayed in the image/library code
field.
[Insert Image]
button
[OK] button
Setting the library data
To set a library code in the image/library code field by selecting library data from
the list, follow the procedure described below.
