6-9
Section
Graphs
226
0%
Table Entry:
Specify this item if a 0% value is set by a numeral memory table
entry; set the table entry number of the numeral memory table.
Value:
Specify this item if a 0% value is set by a constant; set the value to
be taken for a 0% value.
–100%
Table Entry:
Specify this item if a –100% value is set by a numeral memory
table entry; set the table entry number of the numeral memory
table.
Value:
Specify this item if a –100% value is set by a constant; set the val-
ue to be taken for a –100% value.
Note that specification for –100% is valid only when [Display Sign] is selected.
Setting of 0% and –100% is not possible with NT20S and NT600S.
Guidance
The following types of bar graph element are provided.
0% to 100% display
Direction: Right
Direction: Left
Direction: Up Direction: Down
–100% to 100% display
Direction: Right
Direction: Left
Direction: Up
Direction: Down
Which of [0 to 100%] and [–100 to 100%] bar graphs is displayed should be
selected with the setting for [Display Sign] in the general attributes.
Check mark set:
–100 to 100% display
Check mark not set:
0 to 100% display
In the default setting, a percentage value is displayed.
Whether or not a percentage value is displayed can be set with the [Display %]
property.
Check mark set:
A percentage value is displayed.
Check mark not set:
A percentage value is not displayed.
If the setting is for a percentage value to be displayed, the size and display
position of the value can be modified using the element edit function in the
manner shown below. (For detail of the element edit function, refer to page
110.)
